Skip to the content.

GoPro MAX2 QR Code Creator

Create a custom camera mode, and even start a capture all through QR Codes. This is the fastest way to access many of the new GoPro Labs’ firmware features. Many features of this page are also available as a mobile app.
Install from: google play apple app store

Camera Mode:           

  Video Modes:                 
  Computational:        
  Photo Modes:        
  TimeLapse:     
  

Time/Night-Lapse modes: The camera defaults to having presets for only one time-lapse mode and one night-lapse mode, yet both modes have two configurations (video or photo.) For all QR Code mode commands to work, a preset is needed for every mode you wish to use. e.g. If you only have a preset for night-lapse video (NLV), the QR command for NLV will work, but will not for night-lapse photo (NLP). To solve this, create a new preset for NLP, and both video and photo night-lapse commands will work.

Video Resolution:                    

Video Resolution:        

Video Resolution:     

FPS Video:                       

Hypersmooth (2D only):              

Lens (2D only):               

Lens (2D only):         

Lens (2D only):         

Lens (2D only):            

Burst Style:              
                                    

TimeWarp Speed:                    

Timelapse Interval:                       
           

Nightlapse Interval:                       
              

Shutter:                       

Duration:                    
        

Photo Properties:
     

Wind Reduction:           


    Click to select the preferred icon:
ICONS_IMG
    Preset name:
    


LCD
    Spot Meter Coord (x,y):
    
    

      Protune Reset:  
      Protune Color:           
      Color Depth:        
      Bit rate:               
      White Balance:                   
                     
      ISO Min:                       
      ISO Max:                       
      Lock Shutter:                 
            (extended beyond camera menu)         
      EV Compensation:                          
      Sharpness:           
      RAW Audio:              

      GPS:        
      Voice Control:        
      Quick Capture:        
      Default Mode:              
      Beep Volume:                    
      Display Brightness:              
      LEDs On:           
      Orientation Lock:   Landscape            Portrait              
      Camera Auto Off:                 
      Screen Auto Off:              
      WiFi Connections:              
      Voice Language:              
                        
                     

      

      Shutdown and capture in: hours mins secs
         or at camera time: (format 24hr HH:MM)
         or minutes after sunrise: e.g. -30 for mins before (requires GPS)
         or minutes after sunset: e.g. -45 for mins before (requires GPS)
      Start Capture:            
      End Capture:            
      End capture after: hours mins secs
         or at camera time: (format 24hr HH:MM)

      Start via Motion Detection: start end sensitivity (1-9)
         Delay start: seconds to get out of the shot.
         Mask motion: seconds to learn background motion.
         Hold time: seconds to capture after motion stops.

      Start at GPS Velocity (km/h): start speed end speed
         
Hold time: seconds)

      

Additional Commands:


GoProQR:


Share this QR Code as a URL:


More features for Labs enabled cameras

updated: October 1, 2025