USB Power Trigger

The camera can use the switching on of USB power to boot the camera, and perform an action of your choice.

The command to perform: e.g. !S Will start capture in the camera’s default mode. You can make you own command using many of the features within the GoPro QR Code Creator.

Start command    seconds after USB power,
and end after    seconds after USB power is off.

Note: A battery is required, as the camera needs close captured video when power is removed. Unfortunately this means your battery will eventually discharge, so it is best to have a spare battery if you intended to used this feature as a dedicated dash-cam.

Repeat for the next USB power on event

Copy Image to Clipboard

Share this QR Code as a URL:
Copy URL to Clipboard

Compatibility: Labs enabled HERO7 (limited), HERO8, HERO9, HERO10, HERO11, HERO12 and MAX

ver 1.04

More features for Labs enabled cameras